|
X-Rite
i1XTreme UV (EOXTRUV)
i1XTreme Product Brochure (pdf)
Accessories
System Requirements
Macintosh®
Mac OS X (10.2 or higher)
128 MB of available RAM
80 MB of available hard disk space
Monitor resolution of 1024 x 768 pixels or higher
USB support
Windows®
Windows® 2000, Windows® XP
Processor: Pentium® II, 266 Mhz or higher
128 MB of available RAM
80 MB of available hard disk space
Monitor resolution of 1024 x 768 pixels or higher
Power Conditions
Powered by USB, no additional charger required: USB 1.1 high power device
|
With i1XTreme UV you can handle just about any color management issue or problem that comes your way. You can measure and control color on digital cameras, scanners, displays and printers of all types—even digital projectors—with the complete i1Beamer kit that’s included.
i1XTreme UV calibrates and profiles:
- Monitors – LCD, CRT and Laptops
- RGB Output
- CMYK Output
- Scanners
- Digital Projectors
- Digital Cameras
i1XTreme UV provides the ability to:
- Edit Profiles
- Capture Flash and Ambient Light
- Measure Spot Colors
i1XTreme UV provides high value services:
- i1 Protection Plan – extended warranty to 3 years
- Express replacement service for any repairs
- Interactive training CD included
i1XTreme UV provides all the tools necessary to implement a color managed workflow. It includes the new "Accelerated i1Pro" device and award-winning i1Match software. And with the powerful i1Share software that is also included, you can take full advantage of your i1 system.
The UV cut option allows use with 3rd party RIP calibration software.
* RGB Easy and CMYK Easy profiling takes advantage of new "small test chart" technology where you can quickly and easily create a perceptual color profile by reading just a few rows of color swatches from a given output device. Within the i1Match application, you simply print the small test chart named RGB Easy or CMYK Easy and then scan it in using your i1 device.
Add the i1iO
The new i1iO provides a new level of automation for fast, automated test chart reading, adding even more versatility to the award-winning i1 system.
i1iO is ideal for creatives/designers, photographers, prepress, corporate design, ad agencies, as well as for print for pay, fine arts, sign shops, textile printing, large format printing and high speed digital printing environments.
i1iO provides the fastest measurements for reflective test charts on various substrates up to 10 mm - from thin polybag material to ceramics and textiles. i1iO reads more than 500 patches per minute, so you'll have a custom profile in no time!
i1iO, when combined with any i1Pro spectrophotometer, will:
- provide consistent and reliable results
- increase productivity
- lower the level of operator skill required
- reduce the risk of errors
|
|
|
Measurement Modes
Reflectance single measurement,
Reflectance scanning measurement with automatic patch detection
Emission
General
Spectral analyzer: Holographic diffraction grating with diode array
Spectral range: 380 - 730nm
Spectral reporting: 10nm
Emission spectra: Spectral radiometric emission measurement of the luminance
Measurement aperture: 4.5mm
Measurement range: 0...300 cd/m2
Short-term repeatability: x,y: +0.002 typical (CRT 5000°K white patch 80 cd/m2)
Interface: USB
Physical dimensions: Length 151mm, width 66mm, height 67mm (6 x 2.6 x 2.6 in)
Weight: 185 g (6.5 oz)
Accessories included: Calibration plate, USB cable, CRT monitor holder, flat panel holder, positioning target and scanning ruler
Reflection
Measurement geometry: 45/0 ring optics, DIN 5033
Light source: Gas filled tungsten (Type A)
Physical filters: No or UV cut (Filters not exchangeable, neutral incandescent lamp light A)
Inter-instrument agreement: Average 0.4 ∆E* 94**, max 1.0 ∆E* 94**
(deviation from GMB manufacturing standard at a temperature of 23°C for a single measurement on 12 BCRA tiles (D50, 2°)
Short term repeatability: 0.1∆E* 94 (d50, 2°), mean value of 10 measurements every 3 seconds on white
|
|
