The Break Room at FlexoExchange

this is a used equipment site what I'm looking for is a manufacturer that will build new fanfolders.
Thanks

With B-Bunch going out of buisness who else is out there for fanfolding equipment?
Anyone?
Thank

Does anyone have any suggestions for an ink pan level indicator. Please provide your thoughts.

On most P-Series the doctor roll rides on a bearing and is not gear driven. Check the bearings for for wear and make sure they spin free. This can cause starvation issues. For our P-Series we use Tresu chambers just for this reason.

With 6 mils of adhesive you will most likely have adhesive whip back onto the label. You can try having the die coated with an anti adhesive coating (ROTO REPEL) and stripping the matrix directly off the die.
Good luck.
DK-

They are both course aniloxes I don't believe there will be much of a difference, With that being said a 180 line the cell engraving will be deeper to maintain the 10.0 BCM.

I have found ink spitting is more related to ink viscosity than an anilox. A Lamella Tip blade will help or use a UV reducer in the ink. If you are running a MA P Series press you can order a smart blade, These work quite well.

American Roller Company Plasma Coatings.
Keco
I'm sure there are several other as well.

We use what is called a Permanganate stain test. It takes a bit to dial things in but no MEK.

https://www.uvprocess.com/cure/1866-per ... -test.html

We produce medical wristbands and labels.
So far the team is health and safe.
Thanks to all who continue to work and keep the supply lines moving.
DK

You may want to consider laser anilox cleaner from PCMC. They do an amazing job. Link Below.
https://www.pcmc.com/blog/-in-tags/tags ... ox-cleaner

You could try an Apex GTT XXL anilox. The have a different cell geometry and may be able to carry the particles.

http://grafotronicinc.com/en/easy-fold- ... g-machine/

Link to Graphotronic.

Graphtronic Sell an off line folder.

Fuzz,
Can you recommend a supplier?