Opinion on hot glue on plate seems

Ask or answer questions related to the flexo pressroom environment

Moderator: Frank Burgos

Re: Opinion on hot glue on plate seems

Postby george3636 » Tue Sep 07, 2021 10:14 am

I had issues with plate lifts into I changed to 3M printing tape.
george3636
 
Posts: 92
Joined: Mon Dec 19, 2011 2:47 pm

Re: Opinion on hot glue on plate seems

Postby iteachflexo » Sat Sep 11, 2021 9:08 am

Plate lift is a pretty common problem especially in narrow web printing. I have never tried using hot melt. Have tried what everyone else has mentioned, primer, foil tape, black marker, heat gun. Technology has improved over the years on plate mounting tape. I have tested many brands. But I have always stuck with 3M 1115 and Tesa 52017. If you are having problems with plate lift, I would highly recommend Tesa 52017. Note that it is important to clean the back of the plate with 100% isopropyl alcohol before mounting the plate to the print cylinder.
iteachflexo
 
Posts: 39
Joined: Thu Aug 02, 2018 11:20 am

Previous

Return to Pressroom

Who is online

Users browsing this forum: No registered users and 6 guests

cron